Driveway & Pavers in Mountain View - Free Measure, Itemized Written Quote

Trusted Driveway & Pavers for Mountain View Homeowners

A new Driveway & Pavers - Mountain View installation typically runs $7,000-$18,000, while concrete starts around $4,500 and asphalt near $3,500. Most Mountain View homeowners get a written quote within 48 hours and work starts within two to three weeks once materials are confirmed. Call (669) 215-4852 and we’ll schedule a free estimate at your home.

Call (669) 215-4852

We’ve been building and replacing driveways across Mountain View since 2007, and the pattern we see is consistent: homeowners who bought between 2015 and 2025 paid a premium for their property, and they’re not interested in a contractor who shows up with a verbal guess and a handshake. Grant Rowan founded this company on the principle that every project gets a written price before any work starts, every change requires a signed change order, and every customer leaves with a documented photo record of what was found and what was done. That’s The Haven Standard, and it’s how we’ve kept 4,000-plus projects within a few percent of the agreed price.

Mountain View’s climate is harder on driveways than many homeowners realize. The clay-heavy soils in neighborhoods like Old Mountain View and Monta Loma expand and contract with winter rains, while the intense summer sun on south-facing driveways in Waverly Park bakes asphalt and fades concrete sealers. We’ve replaced driveways that failed in five years because the original contractor skipped compaction testing, and we’ve saved homeowners thousands by catching drainage issues before they undermined the subgrade. Our crews are background-checked and uniformed, a live person answers calls 24/7, and your project gets a dedicated photo record you can review before we leave.

What Our Driveway & Pavers Service Includes

Paver Driveways

Paver driveways use interlocking concrete, brick, or stone units set on a compacted aggregate base with joint sand locking them in place. You need this when your existing driveway is cracked beyond repair, when you want a surface that can be lifted and re-leveled if the soil settles, or when you’re matching a new driveway to an existing patio or walkway in Mountain View’s older neighborhoods. We install Belgard and Techo-Bloc pavers with a minimum 6-inch compacted base, and we test compaction density with a nuclear gauge before laying a single unit. If the base fails, the pavers fail, so we document the density reading in your photo record.

Concrete Driveways & Concrete Work

Concrete driveways are poured-in-place slabs, typically 4 to 6 inches thick with steel or fiber reinforcement and control joints to manage cracking. Choose concrete when you want a clean, continuous surface at a lower upfront cost than pavers, or when your Mountain View home’s HOA specifies concrete for architectural consistency. We pour with a minimum 3,000 PSI mix, add air entrainment for freeze-thaw resistance, and saw-cut control joints within 24 hours. In the Cuesta Park area, where many driveways slope toward the garage, we also install trench drains or slot drains to keep water out of your foundation.

Asphalt Driveways & Resurfacing

Asphalt is a petroleum-based paving material applied hot and compacted while pliable, with a typical lifespan of 15 to 20 years in Mountain View’s climate. Resurfacing adds a 1.5 to 2-inch overlay on a structurally sound base; full replacement is needed when the base has failed or the existing asphalt is more than 2 inches below adjacent concrete. We don’t recommend asphalt for steep driveways in the Los Altos Driveway & Pavers border areas, where summer heat can soften the surface and cause tracking. When we do install asphalt, we use a minimum 2-inch compacted lift and verify density with a non-nuclear gauge.

Driveway Repair & Replacement

Repair addresses isolated damage: slab jacking for settled concrete, infrared patching for asphalt potholes, or paver re-leveling for settled interlocking units. Replacement is the right call when more than 25 percent of the surface is compromised, when the base has failed, or when repeated repairs have cost more than half the price of a new surface. In Mountain View’s Whisman Station area, we’ve seen driveways that needed replacement after three patch jobs because the original contractor never addressed the subgrade drainage. We pull permits through the City of Mountain View Community Development Department when required, and we pass inspection before you pay.

Patios, Walkways & Pool Decks

These are horizontal hardscape surfaces using the same materials and base construction as driveways, but with different load requirements and often with decorative finishes. Pool decks need slip-resistant surfaces and proper drainage away from the pool shell; walkways need gentle cross-slope for drainage without creating a trip hazard. We’ve built paver patios in the Blossom Valley-adjacent areas of Mountain View where homeowners wanted outdoor kitchen pads that matched their driveway, and we’ve replaced pool decks in the Waverly Park area where salt-chlorinated water had degraded the original coping, as well as completed Driveway & Pavers in Stanford for nearby clients. Every project gets the same written price, signed scope, and photo documentation.

Brick Paver Driveway

Brick pavers are clay-fired units, typically 4 by 8 inches, set on the same compacted base system as concrete pavers but with a distinct aesthetic that complements Craftsman and traditional architecture. They’re porous, so they require more frequent sealing in Mountain View’s climate than concrete pavers, and the color variation is batch-dependent so we order from the same production run. We’ve installed brick paver driveways in the Old Mountain View historic district where the architectural review board required materials consistent with the neighborhood’s 1920s character. We keep a 5 percent overage for future repairs, matched to your batch, because brick colors vary by kiln and clay source.

Stamped Concrete Driveway

Stamped concrete is standard concrete colored and textured with polyurethane stamps to mimic stone, brick, or slate, then sealed to protect the surface. It’s less expensive than actual pavers but cracks as a monolithic slab, and the repair is visible. We recommend stamped concrete for Mountain View homeowners who want the look of natural stone at a concrete price point, with the understanding that control joints will interrupt the pattern. We use integral color mixed at the plant, not surface-applied color hardener, because surface color wears unevenly under tire traffic. The stamp pattern and release color are selected from sample boards you approve before we pour.

Brands We Service for Driveway & Pavers

We source and install Belgard pavers for Mountain View homeowners who want a manufactured concrete paver with consistent color and dimensional tolerance. Belgard’s Catalina Slate and Dublin Cobble patterns are the two we specify most often for Mountain View’s mix of ranch and contemporary architecture, and we’ve installed both in neighborhoods from The Crossings to Gemello. We keep current catalog cuts and physical samples in our showroom so you can compare color in Mountain View’s natural light, not under showroom LEDs that skew warm.

Techo-Bloc is our other primary paver supplier, particularly for their permeable paver line which meets Santa Clara County’s stormwater management requirements for properties with limited drainage area. We’ve used Techo-Bloc’s Permea pavers in several Mountain View infill projects where the lot coverage left no room for traditional drainage, and the permeable base system passed county inspection without additional retention tanks. Whether you have Belgard, Techo-Bloc, or any other make, we can source matching materials and install to manufacturer specifications.

Before

After

Signs You Need Driveway & Pavers Right Now

• Alligator cracking or spider web patterns in asphalt. This fatigue cracking indicates the base has failed beneath the asphalt layer, and water is now penetrating to the subgrade. In Mountain View’s winter rains, this accelerates rapidly; we’ve seen driveways go from surface cracking to potholes in a single wet season. The repair is not another seal coat; it’s base reconstruction or full replacement.
• Standing water more than 30 minutes after rain stops. Poor drainage degrades every driveway material, but it’s particularly destructive to concrete where freeze-thaw cycles (yes, even in Mountain View’s mild climate) create spalling and pop-outs. We’ve traced drainage problems to settled catch basins, clogged trench drains, or simply incorrect slope in the original pour. The fix is regrading or drainage installation, not just surface replacement.
• Paver units that rock or settle independently. When individual pavers shift under foot or tire, the bedding sand has washed out or the edge restraint has failed. This is common in Mountain View where gardeners use pressure washers too close to paver edges, or where drip irrigation lines saturate the base. Left unaddressed, the void beneath spreads and the repair grows from re-bedding a few units to rebuilding a section.
• Concrete spalling or exposed aggregate. Spalling is the flaking or peeling of the concrete surface, usually from freeze-thaw damage, deicer chemical attack, or improper finishing during original placement. Once the paste layer is gone, the aggregate is exposed and the surface deteriorates exponentially. We’ve replaced spalled driveways in the Monta Loma area where the original contractor added water at the site to ease placement, weakening the surface paste.
• Your driveway is 20-plus years old and showing multiple symptoms. No driveway material lasts forever in Mountain View’s climate, and deferred replacement often costs more than proactive work. We’ve had Mountain View homeowners call after a cracked driveway damaged their car’s suspension, or after a trip hazard caused an injury. The 365-Day Done Right Promise covers our work, but it doesn’t cover the years of incremental damage from waiting too long.

Our Driveway & Pavers Process - Step by Step

1. 1
   Site evaluation and written estimate. We visit your Mountain View property, measure the existing driveway or planned area, assess drainage patterns and soil conditions, and photograph the current state. Within 48 hours, you receive a written quote with line-item pricing for demolition, base preparation, materials, installation, and sealing. Under Clause 1 of The Haven Standard, this price is fixed; no work starts until you have it in writing.
2. 2
   Material selection and permit application. You choose your paver pattern, concrete finish, or asphalt spec from physical samples, not website photos. We apply for permits through Mountain View Community Development if your project requires them, which includes most replacements and all new construction. We handle the plans, the fees, and the inspection scheduling; you don’t visit City Hall unless you want to.
3. 3
   Demolition and base preparation. We remove the existing surface and excavate to the specified depth, typically 8 to 12 inches for pavers and 6 to 8 inches for concrete. We test the native soil for organic content and compaction; if it’s unsuitable, we import and compact Class 2 aggregate base in 6-inch lifts. Every lift is density-tested before the next goes in, and the readings go in your photo record.
4. 4
   Installation and quality checkpoints. Pavers are laid to pattern with 1/8-inch joint spacing, leveled with a plate compactor and locked with polymeric sand. Concrete is poured, screeded, bull-floated, and finished to your specified texture, with control joints saw-cut before the slab reaches final set. Asphalt is placed in a single lift for overlays or two lifts for new construction, with density verified before cooling. We photograph each stage for your documented record.
5. 5
   Final inspection, sealing, and documentation. We walk the completed surface with you, verify drainage with a water test, and apply the specified sealer if your contract includes it. You receive the final photo record, any warranty documentation, and a copy of the signed permit inspection approvals. The 365-Day Done Right Promise begins at substantial completion; if anything isn’t right, we make it right.

How Much Does Driveway & Pavers Cost in Mountain View?

Driveway & Pavers Near Mountain View - Our Service Area

We build and replace driveways throughout Mountain View and the surrounding communities, including Driveway & Pavers in Los Altos, Driveway & Pavers in Sunnyvale, Palo Alto, Los Altos Hills, Stanford, Cupertino, Santa Clara, Menlo Park, Newark, Atherton, and Saratoga. Most Mountain View homeowners receive a written quote within two business days of our site visit, and we typically schedule work within two to three weeks of contract signing, depending on material availability. Permits through Mountain View Community Development add 5 to 10 business days for review, which we factor into our project timeline.

Frequently Asked Questions - Driveway & Pavers in Mountain View

Schedule Your Driveway & Pavers Service in Mountain View Today

Call (669) 215-4852 to schedule your free estimate. You’ll get a written price before any work starts, a fixed scope with no hidden charges, and a documented photo record of every visit. Our crews are background-checked and uniformed, a live person answers calls 24/7, and every project is backed by the 365-Day Done Right Promise. Grant Rowan and the team at Rowan Construction Group Mountain View have delivered 4,000-plus projects since 2007, every one with a written price and a documented record. Let’s put your driveway in writing.

Written by Grant Rowan, Owner at Rowan Construction Group Mountain View, serving Mountain View since 2007.