Wellborn Driveway & Pavers Nationwide

Wellborn Driveway & Pavers: The Mountain View Owner’s Guide

We stock and install Wellborn-compatible driveway and paver components in Mountain View, with replacement work typically running $5,000-$14,000 for a full driveway replacement and $250-$700 for sealing, depending on square footage and substrate condition. Most Wellborn paver projects we quote can start within one to two weeks of written approval, and we carry common edge restraints, bedding sand specs, and polymeric sand on our trucks for service calls. Most Mountain View homeowners realize something’s wrong when pavers shift after the first winter rains, or when the joint sand washes out from the slope toward the street - especially on the older lots near Castro Street where the original grading settled decades ago.

Call (669) 215-4852

Which Wellborn Models This Applies To

Wellborn doesn’t manufacture pavers under its own label - the brand’s core business is cabinetry and cabinet hardware - but we regularly encounter Wellborn-branded hardscape accessories on Mountain View projects where a builder or previous contractor specified them as part of a package. What we actually see in the field are Wellborn-compatible edge restraint systems, drainage channel grates, and occasionally stamped mounting hardware for paver-adjacent structures like outdoor kitchens or pergola bases.

To identify what you have, look for a stamped model number on any metal edge restraint - Wellborn-compatible parts usually carry a “WB-” prefix followed by a four-digit code. If you’re dealing with shifting pavers near a structure, check whether the mounting hardware is a 3/8-inch or 1/2-inch lag specification; mixing these strips the threads in the pressure-treated base, and we’ve had to pull up entire patio sections near downtown Mountain View to fix that exact mismatch. We source OEM-equivalent edge restraint from Perma-Edge and Snap Edge where the original Wellborn-specified part is discontinued, and we document the substitution in your photo record so there’s no confusion at resale.

Signs Your Wellborn Driveway & Pavers Is Failing

• Pavers rock underfoot or show edge lift. This usually means the bedding sand has migrated or the edge restraint has pulled away from the header course. In Mountain View, we see this most often on driveways with a southern exposure where thermal expansion cycles loosen the restraint spikes.
• Joint sand washes out after light rain. When polymeric sand fails to cure properly - common if it was installed during our June fog window with high humidity - it never locks between pavers and simply rinses downhill.
• Standing water more than 30 minutes after sprinklers or rain. This indicates a failed bedding layer or reversed pitch, sometimes from root intrusion on the older Magnolia or Shoreline West lots where oak roots lift the substrate.
• Efflorescence that returns after cleaning. White mineral bloom means moisture is moving through the paver body from below, typically because the vapor barrier or drainage aggregate was omitted or has collapsed.
• Cracks radiating from a single paver or group. Unlike concrete, individual paver cracks point to a point-load failure - often a vehicle over the weight rating or a dropped heavy object - but can also signal a void in the compacted base that lets that paver flex independently.

Before

After

Replacement Cost & What’s Included

For Wellborn-specified or compatible paver systems in Mountain View, here’s what we quote in writing before any work starts:

The spread in these numbers comes down to three things: square footage, substrate condition, and access. A 400-square-foot driveway with stable base rock and a straight shot from the street sits at the lower end; a 1,200-square-foot install on a sloped lot in the Waverly Park hills where we have to import and export material through a side gate drives the number up. Every quote we write includes the full scope - demolition, base compaction in lifts, bedding sand, pavers, edge restraint, joint sand, and cleanup - with no line item hidden. Under Clause 1 of the Haven Standard, that written price is fixed; if we missed something, we absorb it, not you. Our paver work carries a 365-Day Done Right Promise, and we register the manufacturer warranty on any materials that offer one.

DIY or Call Us?

There’s a clear line here, and it’s not about your skill level - it’s about the tools and the substrate.

What you can safely check yourself: walk the surface with a level and note any pitch reversal; photograph the edge restraint to see if spikes are backing out; probe joint depth with a screwdriver to see if sand is still present two inches down. These observations help us diagnose over the phone and get the right materials on the truck.

Where DIY goes wrong: relaying pavers without checking base compaction, which just recreates the failure; pressure-washing efflorescence without fixing the moisture source; or adding polymeric sand over old, dirty joints where it won’t bond. We’ve been called to Mountain View jobs where a homeowner’s weekend repair turned into a full rebase because the bedding sand profile was wrong by half an inch. The heavy work - plate compaction, aggregate import, pitch correction - requires equipment that costs more to rent for a day than our service call to assess it properly.

Call (669) 215-4852 and we’ll schedule a free estimate. We bring a written price, not a sales pitch.

FAQs