Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Mountain View Owner’s Guide
PGT bathroom remodeling in Mountain View typically runs $9,000-$28,000 for a full remodel, and we stock PGT-compatible shower enclosures, frameless glass systems, and hardware kits for same-day assessment. Most Mountain View owners first notice trouble when the glass door drags, the seal gaps, or the hardware corrodes in our coastal-influenced climate. We carry the full PGT shower door line, including the Elegance and Classic series, and we’ll measure your opening on the first visit so the replacement fits without a second trip.
Which PGT Models This Applies To
PGT builds shower enclosures across three main series: Elegance (frameless, 3/8″ or 1/2″ glass), Classic (semi-frameless, 1/4″ glass with metal framing), and Reveal (sliding bypass with minimal hardware). The model number is etched in the lower corner of the fixed glass panel or printed on a sticker inside the hinge jamb. Measure twice, write it down, then build it that way - we learned that the hard way on a Castro Street job where a 1/4″ width mismatch cost us a full reorder week.
OEM PGT hardware is brass or 304 stainless; aftermarket equivalents exist from CRL and Prime-Line, but the hinge bore spacing on PGT’s Elegance series is proprietary at 5-1/2″ center-to-center, not the standard 5″ you’ll find at most Mountain View hardware stores. We stock both OEM and verified aftermarket for Classic and Reveal series, but for Elegance we source factory-direct to avoid the bore mismatch that causes door sag six months later. Rowan Construction Group Mountain View is an independent service provider, not affiliated with PGT.
Signs Your PGT Bathroom Remodeling Is Failing

- Glass door drags or binds at the bottom. The sweep or hinge has compressed beyond adjustment, or the wall anchor has loosened in the tile backer. In Mountain View’s older Eichler and ranch homes, we see this when the original fiberglass shower pan flexes and throws the door frame out of square.
- Water pooling outside the shower after every use. The vinyl sweep has hardened or the magnetic seal has lost its grip. PGT’s coastal-grade silicone seals last longer than standard vinyl, but they still degrade after 7-10 years in a ventilated bathroom.
- Visible corrosion on hinges, clamps, or framing. Standard hardware shows surface rust in 3-4 years near the Bay; PGT’s 304 stainless holds up better but will pit if cleaned with bleach-based products regularly.
- Glass chips or spider cracks at corners or hardware points. Tempered glass doesn’t crack from age, but it will fail from point-loading if a hinge bolt over-tightens or the wall stud flexes. We document this with photos before touching anything.
- Door swings open on its own or won’t stay closed. The hinge spring or magnetic catch has weakened. On PGT sliding systems, the roller wheels flat-spot after roughly 15,000 cycles - about 8-10 years for a two-person Mountain View household.
Before
AfterReplacement Cost & What’s Included
| Scope | Price Range |
|---|---|
| PGT shower door hardware replacement (hinges, seals, sweeps) | $800-$3,000 |
| PGT Classic or Reveal full door replacement | $3,000-$8,500 |
| PGT Elegance frameless full enclosure replacement | $4,500-$12,000 |
| Full bathroom remodel with PGT enclosure | $9,000-$28,000 |
The spread depends on three things: whether we’re matching existing tile (narrower grout lines cost more in labor), whether the wall substrate needs reinforcement for heavier 1/2″ glass, and whether PGT’s current lead time for custom sizes affects scheduling. Under Clause 1 of The Haven Standard, your price is written before anyone picks up a tool - flat, with line-item parts and labor, and no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation; PGT’s factory warranty covers the glass and hardware.
DIY or Call Us?

There’s safe checking and there’s risky work. A homeowner can verify the model number, measure the opening width at top and bottom (they often differ), and photograph the hinge placement - that saves us thirty minutes on site. What you shouldn’t do: remove a frameless glass panel solo (3/8″ tempered weighs 4-5 pounds per square foot, and a 36″ x 72″ slab is awkward and unforgiving), or attempt to re-drume tile for new hinge anchors without knowing what’s behind it.
We’ve replaced three PGT doors in Mountain View in the past year where the owner cracked the new glass during install or hit a plumbing line behind the tile. The documented photo record we provide shows you exactly what we found and how we fixed it. Call (669) 215-4852 to schedule your free estimate.
FAQs
PGT glass itself is lifetime-rated; the hardware and seals typically need attention at 8-12 years in our climate. Call (669) 215-4852 for an exact quote - estimates are free.
Hardware, seals, and sweeps can be replaced; cracked or etched glass cannot be field-repaired and must be replaced. We stock the common PGT hardware kits and can assess on the first visit. Call (669) 215-4852 for an exact quote - estimates are free.
Removal and replacement of an existing enclosure is one day; a full bathroom remodel with new PGT glass runs 2-4 weeks depending on tile and plumbing scope. Call (669) 215-4852 for an exact quote - estimates are free.
We stock Classic and Reveal hardware, common seal profiles, and measuring templates; Elegance hardware and custom glass sizes are factory-ordered with a 2-3 week lead time. Call (669) 215-4852 for an exact quote - estimates are free.
Written by Grant Rowan, Owner, Rowan Construction Group Mountain View at Rowan Construction Group Mountain View, serving Mountain View and nearby areas.







Before
After
Before
After
Before
After