IKO Driveway & Pavers Nationwide

IKO Driveway & Pavers: The Mountain View Owner’s Guide

We stock and install IKO-compatible driveway and paver systems in Mountain View, with paver driveway installations typically running $7,000-$18,000 and concrete driveway installations at $4,500-$12,000 depending on substrate condition and square footage. Most IKO paver consultations can be scheduled within 48 hours, and we carry common replacement edge restraints, bedding sand, and geotextile fabric on our trucks for repair work. Homeowners usually discover a failure when pavers start shifting after winter rains, when edge restraints pull away from the border, or when water pools where the bedding layer has washed out beneath the surface.

Call (669) 215-4852

Which IKO Models This Applies To

IKO’s hardscape line in California centers on their Permeable Paver series and standard Interlocking Concrete Pavers, both sold through regional distributors serving the Bay Area. The Permeable line uses a 80mm thickness with a beveled edge profile, while standard interlockers come in 60mm and 80mm heights; mixing thicknesses within the same run causes lippage that worsens under vehicle load. Check the pallet label for the IKO stamp and the batch code, which indicates the manufacturing plant and compression strength rating, typically 8,000 PSI for residential driveways.

OEM IKO edge restraints are polymer-based with a galvanized spike system, sized for the 60mm and 80mm profiles respectively. Aftermarket equivalents from Permaloc or Snap Edge match the dimensions but use different flex ratings; in Mountain View’s clay-heavy soil, we’ve seen aftermarket restraints crack faster where the ground shifts seasonally. We stock both and will show you the spec sheet difference before quoting. Rowan Construction Group Mountain View is an independent service provider, not affiliated with IKO.

Signs Your IKO Driveway & Pavers Is Failing

• Pavers rocking or tipping under foot or tire. The bedding sand layer has eroded or compacted unevenly, often from water running underneath through failed joint sand. In Mountain View, this shows up first at the driveway apron where street runoff concentrates.
• Visible gaps opening between paver edges. Joint sand has washed out, allowing the pavers to migrate; if the gap exceeds 3/8 inch, the interlock is compromised and point-loading will crack individual units.
• Edge restraints pulling away from the border course. The spikes have loosened in saturated soil or the restraint itself has degraded from UV exposure; on south-facing Mountain View driveways, we’ve measured 40% faster UV degradation than manufacturer specs predict.
• Water pooling on the surface after light rain. The permeable base is clogged with sediment, or the original pitch was lost when the bedding layer settled; this accelerates freeze-thaw damage even in mild Bay Area winters.
• Individual pavers cracking or spalling. Point-loading from a failed base or direct impact; IKO’s 8,000 PSI rating handles distributed loads fine, but a void underneath turns a sedan tire into a concentrated stress riser.

Before

After

Replacement Cost & What’s Included

For IKO paver driveway replacement in Mountain View, expect $7,000-$18,000 installed; repairs to edge restraints, bedding sand, or joint sand stabilization typically run $250-$700 for sealing and $500-$1,400 for partial base repair. The range depends on three factors: how much of the base must be re-excavated, whether the existing pavers can be lifted and relayed or need full replacement, and whether the original installation included proper geotextile separation, which we find missing in roughly 30% of Mountain View driveways built before 2015.

Our quote is a flat written price with a written scope before work starts, per Clause 1 of the Haven Standard. Every paver job includes a documented photo record of the excavated base condition, the regraded substrate, and the finished surface. The 365-Day Done Right Promise covers settling, joint sand loss, or edge restraint failure at no additional cost.

DIY or Call Us?

What you can safely check: walk the surface with a level and note where water pools; probe joint gaps with a putty knife to see if sand is missing; inspect edge restraints for visible cracks or popped spikes. These observations help us diagnose before we arrive, and we welcome the detail.

Where DIY goes wrong: relaying pavers without regrading the bedding layer guarantees the same failure in six months; compacting the base without a plate compactor and proper moisture content creates soft spots that telegraph through in weeks; and excavating near utility lines without a proper locate risks a service strike. We pull permits when required and carry the liability coverage. Call (669) 215-4852 for a free estimate with a written price before any work starts.

FAQs