CGI Roofing Nationwide

CGI Roofing: The Mountain View Owner’s Guide

We stock and install CGI-compatible roofing components in Mountain View, with most replacement parts available same-day and typical installed repair costs running $400-$1,800 depending on the component and roof access. A full CGI roof replacement in Mountain View generally falls between $8,000 and $20,000, with tile roofs on the higher end of that range. Most Mountain View owners discover a CGI part has failed when they spot cracked barrel tiles after a winter storm, notice water staining on a ceiling panel below a valley, or find mortar bedding crumbling at the ridge line - usually after the Santa Clara Valley’s freeze-thaw cycles have done their work.

Call (669) 215-4852

Which CGI Models This Applies To

CGI, or Concrete and Clay Industries, produces several tile profiles common across Mountain View’s 1950s ranch homes and the Mediterranean-style builds in the Monta Loma and Waverly Park neighborhoods. The two series we see most are the S-Tile (also called Spanish S) and the Flat Shingle Tile - both cast from portland cement with color-through pigment rather than surface coating. To identify your series, check the underside of a loose tile for the stamped date code and profile letter; S-Tiles measure roughly 17 inches long with a 9-inch exposure, while Flat Shingles run 13 inches with a 7-inch exposure.

OEM CGI tiles are still manufactured in Florida and carry a 50-year material warranty, but shipping lead times to Mountain View can stretch 4-6 weeks. We source quality aftermarket equivalents from Eagle Roofing and Westlake Royal - both meet ASTM C1492 for concrete roof tile and match CGI’s weight class at 950-1,200 pounds per square. The aftermarket decision usually comes down to color match: if your CGI roof is more than 15 years old, the original pigment batch has likely shifted enough that an OEM tile stands out more than a well-matched third-party piece. We bring sample boards to every estimate and test-fit against your existing field tile before ordering.

Signs Your CGI Roofing Is Failing

• Cracked or broken field tiles, especially near valleys and hips. CGI concrete tiles are brittle under point load - a ladder foot, a dropped branch, or a worker’s knee can fracture them. Once cracked, the underlayment beneath takes direct UV and water exposure, and Mountain View’s 20-30 annual rainy days are enough to saturate the felt and reach the deck.
• Water stains on interior ceilings that align with a tile course below. This usually means the birdstop (the closure piece at the eave) has slipped or the eave riser has settled, creating a gap where wind-driven rain enters. In older Mountain View homes with original CGI installations, we’ve found birdstops installed without mechanical fasteners - just mortar that degrades.
• Granular debris in gutters that matches your tile color. CGI tiles develop surface erosion as the cement paste wears; heavy granule loss indicates the tile has thinned enough to lose structural integrity. This accelerates after about 25 years in California’s UV exposure.
• Sagging or separated ridge caps with visible mortar gaps. The mortar bedding at ridges and hips is a maintenance item, not permanent. When it cracks, cap tiles loosen and the ridge line becomes a water channel directly into the roof cavity.
• Efflorescence - white powdery deposits - on tile surfaces. This signals moisture migration through the tile body, usually from failed underlayment or inadequate headlap in the original installation. It’s cosmetic early on, but indicates the waterproofing layer is compromised.

Before

After

Replacement Cost & What’s Included

What drives the range: roof pitch (steeper = more labor), access difficulty (single-story ranch vs. two-story with tight setbacks), and whether we can match existing tile or must replace a full field for consistency. Under Clause 1 of the Haven Standard, every quote is a flat written price with line-item scope - no “call for pricing,” no open-ended allowances. Our 365-Day Done Right Promise covers the workmanship; manufacturer warranties cover the materials. We pull permits through Mountain View’s Community Development Department and schedule inspection before final payment.

DIY or Call Us?

There’s a safe middle ground for CGI owners. You can walk the roof on a dry day - wear soft-soled shoes and step only on the lower third of each tile where it rests on the batten - to photograph cracks, missing pieces, or mortar gaps. You can check gutters for granule buildup and note any ceiling stains with a date. What you should not do: replace tiles yourself (the underlayment patch requires proper integration with existing felt), rebed ridge caps (working at height with mortar on a pitched surface is how emergency rooms stay busy), or pressure-wash the roof (high-pressure water drives under tiles and destroys underlayment).

Concrete tile roofs in Mountain View typically weigh 9-12 pounds per square foot. That’s structural load your framing was designed for, but it’s also mass that can slide in sheets if disturbed incorrectly. We carry CGI-compatible tiles, underlayment, and mortar mix on our trucks, and we background-check every technician who steps on a ladder. Call (669) 215-4852 to schedule your free estimate - we’ll match your profile, test-fit a sample, and give you a written price before any work starts.

FAQs