Cambridge Pavers Driveway & Pavers Nationwide

Cambridge Pavers Driveway & Pavers: The Mountain View Owner’s Guide

We stock and install Cambridge Pavers-compatible driveway and paver systems in Mountain View, with typical installed replacement costs running $7,000-$18,000 for a full paver driveway depending on square footage and base condition. Most Cambridge Pavers jobs in the area can be assessed within 24 hours, and we carry common matching units on our trucks for the Armortec and Sherwood series most frequently found in Santa Clara County. Most Mountain View homeowners discover their Cambridge Pavers surface is failing when they notice pooling after light rain, a telltale sign the permeable jointing sand has washed out or the bedding layer has settled unevenly under the freeze-thaw stress of our mild but wet winters.

Call (669) 215-4852

Which Cambridge Pavers Models This Applies To

Cambridge Pavers produces several distinct product lines, and matching the right unit matters for structural compatibility and color consistency. In Mountain View, we most commonly encounter the Armortec paving stones, the Sherwood series for permeable applications, and the older Ledgestone units installed during the 2012-2018 building surge near downtown and the San Antonio neighborhood.

To identify your series, check the spacer nibs on the paver edge: Armortec has a single continuous chamfer with micro-bevel, Sherwood uses a three-point spacer system for wider joint gaps, and Ledgestone has no spacer nibs at all, relying on manual joint width. The color code is stamped on the pallet tag, not the paver itself, so photograph any remaining packaging before disposal. If you lack the tag, we can match by spectrophotometer to Cambridge’s current production lots, though discontinued colors may require a full-area replacement to avoid patchwork appearance.

We source OEM-equivalent units through Cambridge’s regional distributor in San Jose, or match with Belgard and Techo-Bloc alternatives when the original series is discontinued. The aftermarket decision depends on whether your installation is still under Cambridge’s limited lifetime warranty, which requires OEM replacement units and documented installation by a certified contractor to remain valid.

Signs Your Cambridge Pavers Driveway & Pavers Is Failing

• Standing water or birdbath depressions. This indicates the screeded bedding sand layer has washed out or compacted unevenly, often from inadequate edge restraint or subgrade settlement. In Mountain View’s clay-heavy soils near Permanente Creek, we see this where the 4-inch compacted base was installed without geotextile separation.
• Widening joints with weed growth or ant mounds. The polymeric joint sand has degraded or was never properly activated with water during initial installation. Cambridge’s permeable Sherwood series is particularly sensitive to this, as the larger aggregate joint material migrates faster if the bedding layer below is compromised.
• Chipped corners or spalling surface texture. Armortec’s hard-fired surface can delaminate from the concrete body if subjected to de-icing salts or pressure washing above 2,500 PSI. Mountain View rarely sees freeze-thaw cycling severe enough to cause this, so spalling usually points to chemical damage or a manufacturing defect in that production lot.
• Sinking or tilting pavers near the garage threshold or curb cut. The edge restraint has failed, allowing lateral migration of the bedding course. This is common where plastic PVC edging was used instead of steel or concrete curb, especially on driveways with regular vehicle traffic across the threshold.
• Hollow sound when tapped with a rubber mallet. The paver has lost full contact with the bedding sand beneath, creating a void. This progresses to cracking under load and is often the first sign of subgrade failure that will require base excavation, not just surface relaying.

Before

After

Replacement Cost & What’s Included

Full Cambridge Pavers driveway replacement in Mountain View runs $7,000-$18,000 installed, with the range driven by square footage, base condition, and whether we can salvage existing pavers for color matching. A partial repair, typically 100-400 square feet of failed area with base correction, falls in the $2,500-$6,500 range.

Every quote is a flat written price with line-item scope before work begins. Under Clause 1 of the Haven Standard, no number changes once signed unless you approve a written change order. Our 365-Day Done Right Promise covers the installation, and Cambridge’s material warranty runs separately through the manufacturer.

DIY or Call Us?

There’s honest work a homeowner can do, and there’s work that wastes your Saturday and still needs fixing. You can safely check for hollow pavers with a rubber mallet, photograph the color code on any remaining pallet tags, and clear joint debris with a shop vacuum. These steps help us quote accurately when you call.

What goes wrong with DIY: relaying pavers without correcting the base failure guarantees recurrence within one winter. Compacting bedding sand requires a plate compactor and controlled moisture content, clay soils near drainage swales need geotextile separation most homeowners don’t install, and polymeric joint sand must be activated with precise water volume, timing, and temperature, or it forms a crust that traps moisture and accelerates spalling. We’ve relayed three Mountain View driveways in the last two years where the homeowner’s weekend repair lasted eight months.

Measure twice, write it down, then build it that way. Call (669) 215-4852 to schedule your free estimate, and we’ll bring the plate compactor.

FAQs