ActiveYards Driveway & Pavers Nationwide

ActiveYards Driveway & Pavers: The Mountain View Owner’s Guide

We stock and install ActiveYards-compatible driveway pavers and retaining wall components in Mountain View, with most replacement and repair projects running $5,000-$14,000 for driveway replacement and $3,500-$11,000 for paver patio work, depending on substrate condition and square footage. For standard failure modes like settled base, cracked pavers, or failed edge restraints, we carry matching inventory and can typically start within a few business days. Most Mountain View owners first notice trouble when pavers shift after winter rains or when the polymeric sand between joints washes out along the driveway slope toward the street.

Call (669) 215-4852

Which ActiveYards Models This Applies To

ActiveYards produces several hardscape lines that have shown up across Mountain View properties, particularly in the Monta Loma and Springer Ranch neighborhoods where newer infill builds specified them. The most common are the Belgard Catalina paver series (often labeled on pallet tags as “Catalina Slate” or “Catalina Grana”), the Techo-Bloc Blu 60 and Antika lines, and the Permacon retaining wall systems sold through ActiveYards distribution. To identify your exact match, check the underside of a loose paver for the manufacturing stamp, which includes the production run date and spec code. The color batch matters more than most owners realize: a Catalina paver from 2019 carries a different iron oxide pigment load than 2023 production, and the mismatch will show under Mountain View’s strong afternoon sun.

We source OEM-equivalent material from ActiveYards distribution partners, not generic big-box stock. For discontinued lines, we match compressive strength (typically 8,000 PSI for vehicular pavers) and absorption rate (under 5% for freeze-thaw resistance, which matters even in our mild climate during rare cold snaps). Aftermarket equivalents from Belgard and Techo-Bloc are available when ActiveYards stock is back-ordered, and we document the substitution in writing before any work starts.

Signs Your ActiveYards Driveway & Pavers Is Failing

• Pavers rocking or tilting under foot or tire. This usually means the bedding sand layer has washed out or the base compacted improperly. In Mountain View, the clay-heavy soil in the Old Mountain View area near Castro Street holds moisture longer than the sandy loam up toward the foothills, so settling patterns differ by neighborhood.
• Visible gaps opening between paver edges. The joint sand has eroded, or the edge restraint has pulled away from the perimeter. Once the restraint fails, the field pavers migrate outward and the pattern destabilizes.
• Standing water more than 30 minutes after rain. The original pitch was insufficient, or the base has settled and created a birdbath. On sloped Mountain View lots, this often shows near the garage apron where the driveway meets the foundation.
• Chipped corners or spalling surface. De-icing salt is rare here, but pressure washing at too narrow a fan angle will micro-fracture the surface. We’ve also seen this from metal-edged snow shovels during the occasional freeze.
• Weeds or moss growing thick in joints. The polymeric sand binding agent has degraded, or it was never properly activated with water during original installation. Mountain View’s marine layer keeps joints damp enough for growth once the seal breaks down.

Before

After

Replacement Cost & What’s Included

What drives the range: square footage, whether the base needs full excavation versus spot repair, and access for our compaction equipment. A 400-square-foot driveway on a flat lot with sound base runs toward the lower end; a 600-square-foot job on a steep grade with failed aggregate base and poor access pushes higher. Our quotes include removal and disposal of existing material, base preparation with proper compaction in 6-inch lifts, bedding sand, pavers, joint sand or polymeric fill, and edge restraint. Under Clause 1 of the Haven Standard, the written price covers everything in the scope; if we hit unexpected subsurface conditions, we stop and present a signed change order before continuing. The 365-Day Done Right Promise covers workmanship, and manufacturer defects are handled per the paver line’s specific warranty.

DIY or Call Us?

What you can safely check yourself: lift one paver from an edge and examine the base layer. Sound base is compacted crushed stone, roughly 3/4-inch minus, with no visible mud or organic material. If you see gray, loose crusher fines or standing water in the excavation, the base has failed and spot repairs won’t hold.

Where DIY goes wrong: base preparation is the entire job. Renting a plate compactor and screeding sand looks straightforward, but achieving 95% Proctor density on the base layer requires calibrated equipment and repeated passes at the correct moisture content. We’ve been called to redo three Mountain View homeowner jobs in the past two years where the pavers looked fine for two months, then settled into washboard patterns after the first heavy rain. The removal and re-do costs more than calling us first.

There’s no high-tension danger here as with garage door springs, but the excavation and hauling is real labor, and the disposal fees at SMaRT Station add up fast. Call (669) 215-4852 and we’ll give you a written price before anyone picks up a shovel.

FAQs