Quikrete Driveway & Pavers Nationwide

Quikrete Driveway & Pavers: The Mountain View Owner’s Guide

We stock and install Quikrete-compatible driveway and paver systems across Mountain View, with most replacement projects running $5,000-$14,000 for driveway replacement and $7,000-$18,000 for full paver installations. Pavers, base material, and edge restraints are typically available same-day through our local suppliers. Most Mountain View homeowners first notice trouble when settlement cracks appear near the garage apron or when individual pavers start rocking underfoot after winter rains.

Call (669) 215-4852

Which Quikrete Models This Applies To

Quikrete does not manufacture pavers or driveway slabs as finished products; instead, they produce the bagged concrete mixes, mortar, and jointing sands that contractors and DIYers use to build paver beds, set edges, and fill joints. The relevant product lines for Mountain View driveways are Quikrete Crack Resistant Concrete Mix (No. 1006-80) for poured aprons and transition slabs, Quikrete All-Purpose Sand for paver bedding layers, and Quikrete HardScapes Polymeric Jointing Sand for locking pavers in place. The gotcha here is moisture content: polymeric sand must be completely dry when swept in, and Mountain View’s marine layer mornings can leave pavers damp until midday. We’ve seen homeowners re-do joints three times because they started at 9 a.m. in July fog. Check the bag date, too. Cementitious products have a shelf life; Quikrete warranties performance for one year from manufacture, and we’ve found bags at big-box stores in San Jose that sat through two rainy seasons.

Signs Your Quikrete Driveway & Pavers Is Failing

• Cracks wider than a quarter inch running across the pour. In Mountain View, this usually means the subgrade wasn’t compacted to 95% standard Proctor density before the concrete went in, or the mix had too much water added at the truck. The concrete itself didn’t fail; what it sat on did.
• Pavers settling into a bowl shape near downspouts or driveway edges. Water is undermining the bedding sand layer. Quikrete All-Purpose Sand bedding without proper edge restraint will migrate outward every rainy season.
• White powder blooming on paver surfaces or concrete. That’s efflorescence, mineral salts wicking to the surface. It’s cosmetic, not structural, but in Mountain View’s clay-heavy soils it signals poor drainage beneath the hardscape.
• Polymeric sand washing out between joints after one winter. Either the sand was damp during installation, or the paver chamfer was too shallow to hold it. We’ve re-sanded driveways near Grant Road where the original installer used play sand instead of polymeric.
• Spalling or surface flaking on poured concrete sections. Usually freeze-thaw damage from water intrusion, rare in Mountain View but common where de-icing salts tracked from Tahoe trips sat on the slab all winter.

Before

After

Replacement Cost & What’s Included

Here’s what we quote in writing before any work starts:

The spread depends on three things: square footage, excavation depth (4 inches for light residential, 6 inches if you park a 3/4-ton truck), and what’s underneath. Mountain View’s older neighborhoods near downtown sometimes have undocumented utility lines or tree roots from mature oaks that add a day to excavation. Our quotes include demolition, haul-away, subgrade compaction, base rock, bedding material, and the finished surface. Under Clause 1 of the Haven Standard, that number is fixed. If we hit something unexpected, we stop, photograph it, and write a change order before continuing. No surprises on the invoice.

DIY or Call Us?

There’s honest work a homeowner can do, and there’s work that wastes money when it goes wrong. Checking for efflorescence, measuring crack width, and confirming whether polymeric sand was actually used - that’s useful reconnaissance. Digging out a settled paver to check bedding depth is safe and tells you plenty.

Where DIY goes wrong: subgrade compaction requires a plate compactor that weighs 150 pounds and needs controlled moisture content in the native soil. Too dry, it won’t compact; too wet, it pumps and settles later. We’ve been called to Mountain View homes where the homeowner rented a compactor but couldn’t get the soil to the right density, then poured anyway. Six months later, the bowl is back. Rebar placement, control joint spacing, and proper slope for drainage (1/4 inch per foot, minimum) are similarly easy to misjudge. If your project is more than three or four pavers, call us at (669) 215-4852 and we’ll give you a written price. Estimates are free, and we bring a photo record so you see what we see.

FAQs