Barrette Roofing Nationwide

Barrette Roofing: The Mountain View Owner’s Guide

Barrette roofing repair in Mountain View typically runs $400-$1,800 installed, depending on whether you’re replacing individual components or addressing underlying deck damage. We stock Barrette-compatible parts for same-day installation on most calls, and we write the scope before anyone touches the roof. Most Mountain View owners discover a Barrette part has failed when they spot granules in the gutter after a rain, or when a neighbor points out a lifted ridge cap on the second story of a Eichler or ranch-style home built during the 1960s-1980s construction wave that still defines much of the city’s housing stock.

Call (669) 215-4852

Which Barrette Models This Applies To

Barrette has manufactured several roofing product lines over the decades, and the part you need depends on the series stamped on the shingle bundle wrapper or the metal edge trim itself. The Barrette Architectural 30 and 40 series, common on Mountain View homes from the 1990s through the mid-2000s, used a proprietary 1.25-inch exposure lock and a slightly narrower ridge vent profile than standard GAF or Owens Corning equivalents. The older Barrette Classic 20, often found on the flat or low-slope sections of mid-century homes near Cuesta Park, relied on a three-tab design with a 5-inch exposure that aftermarket manufacturers have largely discontinued.

We carry OEM-compatible ridge caps, starter strips, and drip edge for the Architectural series, plus a vetted aftermarket equivalent for the Classic 20 that matches the wind rating at a lower per-square cost. The compatibility gotcha: Barrette’s ridge vent used a 10.5-inch width that standard 11-inch aftermarket vents won’t seat cleanly into, leaving a gap that traps moisture against the deck. We measure the existing vent channel before quoting, because guessing wrong means a second trip and a change order neither of us wants. If your shingles are still in production, we match the lot color; if they’re discontinued, we document the closest current equivalent in the written quote and show you a physical sample before ordering.

Signs Your Barrette Roofing Is Failing

• Granule loss exposing the asphalt mat. Barrette’s older organic-mat shingles, common on Mountain View homes built before 1995, lose granules faster than fiberglass-core products in our dry summers and occasional heavy winter rains. Once the mat shows through, UV degradation accelerates and leaks follow within one to two wet seasons.
• Curling or clawing at the shingle edges. This happens when the asphalt hardens and shrinks, usually after 18-22 years in California’s thermal cycling. On south-facing slopes in Mountain View, we’ve seen it as early as year 15.
• Lifted or missing ridge caps. The adhesive strip on Barrette ridge vents degrades faster than the field shingles because it’s exposed to wind from both directions. A lifted cap isn’t cosmetic; it’s the entry point for wind-driven rain that rots the ridge board.
• Staining on the soffit or fascia boards. Water traveling down the roof deck often exits at the eaves before it ever shows inside the house. In Mountain View’s older neighborhoods near Old Mountain View, we see this where original Barrette drip edge was omitted or has corroded through at the nail line.
• Daylight visible through the roof boards from the attic. This means the shingle layer has failed completely at that spot, or the underlayment has torn at a valley or penetration. It’s not always accompanied by interior staining yet, but it will be.

Before

After

Replacement Cost & What’s Included

Roof repair in Mountain View runs $400-$1,800, and roof replacement runs $8,000-$20,000, with most Barrette partial repairs falling in the $650-$1,400 range. What drives the number: the square footage of the affected area, whether the plywood deck beneath is sound, and whether we’re matching discontinued shingles or upgrading to a current series with better fire rating.

Our written quote breaks out parts, labor, and disposal separately. For a typical Barrette ridge vent replacement, that’s the vent material, compatible cap shingles, fasteners rated for pressure-treated wood, ice-and-water shield at the transition points, and haul-away of the failed components. Under Clause 1 of The Haven Standard, that price is fixed before work starts; if we find rotted deck boards once the shingles are up, we document it with photos, write a change order with the exact added cost, and nothing proceeds until you sign it. The 365-Day Done Right Promise covers the installation; manufacturer defects are handled through the shingle warranty we register on your behalf.

DIY or Call Us?

There’s a safe middle ground here. A homeowner can check the attic for daylight, photograph the ridge line from the ground with a zoom lens, and clear gutters of granule buildup to confirm material loss. What you shouldn’t do: walk a 6:12 or steeper pitch without proper fall protection, pry up shingles to check nail patterns, or attempt to replace ridge caps in wind above 15 mph. The Barrette Architectural series uses a four-nail pattern in the manufacturer’s spec, but the nailing zone is narrower than on current Owens Corning products; miss it by half an inch and the wind warranty is void.

We’re not affiliated with Barrette; we’re an independent Mountain View contractor with the parts on the truck and a written price before we start. If you’ve got granules in the gutter or a lifted ridge cap, call (669) 215-4852 and we’ll schedule a free estimate with a photo record you can review that same evening.

FAQs