Mr-Glass Fence Installation Nationwide

Mr-Glass Fence Installation: The Mountain View Owner’s Guide

Mr-Glass fence installation in Mountain View typically runs $3,500-$9,000 for a complete vinyl or aluminum system, with most residential projects in the $4,500-$6,500 range depending on linear footage and terrain. We stock Mr-Glass-compatible posts, panels, gates, and hardware, and we can usually schedule installation within a few business days of your call. Most Mountain View homeowners realize their fence needs attention when panels start separating at the post channels, gates sag past their latch strike, or wind off the bay tilts sections that were never properly anchored in the concrete footing.

Call (669) 215-4852

Which Mr-Glass Models This Applies To

Mr-Glass produces several fence series, and the parts are not cross-compatible between lines. The most common in Mountain View are the VG-200 vinyl privacy series (6-foot panels with routed post pockets), the VG-300 semi-privacy (with the narrower picket spacing), and the AL-100 aluminum ornamental line (3/4-inch square pickets with cast aluminum collars). Check the inside face of your end post for the stamped series code, or measure the wall thickness of the post itself: VG-series posts are 0.135-inch wall vinyl, while the AL-100 posts are 2-inch square extruded aluminum with a 0.080-inch wall.

We source OEM Mr-Glass posts and panels through our distributor in San Jose, but we also keep quality aftermarket equivalents on the truck for emergency stabilizations. The aftermarket posts match the VG-series pocket spacing exactly (5.625 inches on center), though the color match to Mr-Glass’s “Arctic White” or “Clay” can drift by half a shade in direct Mountain View sun after two seasons. For the AL-100 line, we recommend staying with OEM collars and caps; the aftermarket castings we’ve tested crack at the weld point under the lateral load of a gate. If you’re matching an existing fence, bring us a 6-inch scrap of rail and we’ll run it against our sample deck before ordering.

Signs Your Mr-Glass Fence Installation Is Failing

• Panels pulling out of post pockets. The routed pocket in a vinyl post loosens when the concrete footing shifts, which happens more than you’d think in Mountain View’s clay-heavy soil near the Stevens Creek corridor. The panel keeps its shape; the post tilts, and the pocket opens.
• Gate sagging below the latch strike. On Mr-Glass gates, the problem is usually the hinge barrel wearing inside the aluminum frame, not the post. The gate looks level when open but drops 3/4 inch when you release it.
• Rails cracking at the midpoint. Vinyl rails expand and contract; Mr-Glass uses an internal aluminum insert for stiffness, but if the installer missed the expansion gap at the post, the rail buckles outward after two hot summers.
• Post caps popping off. This seems minor, but water entering the post hollow freezes in our occasional January cold snaps and splits the post from the inside. We see this most in older Mountain View installations near the bay where the marine layer keeps everything damp longer.
• Corrosion at the base of AL-100 posts. Aluminum doesn’t rust, but the steel fasteners Mr-Glass uses for the base plate do. Once the bolt head corrodes, the post rocks in its bracket and wallows out the mounting holes.

Before

After

Replacement Cost & What’s Included

The spread on complete installation comes down to three things: how much grade change we’re working with (terraced installs in the hillside neighborhoods off El Camino Real take longer), whether we hit utility lines in the setback (we call USA North 811 before we dig, but locates can delay the start), and whether the city requires a permit. Mountain View requires a fence permit for anything over 6 feet or within 10 feet of a corner lot intersection; we pull that permit, include the fee in the written price, and handle the inspection. Under Clause 1 of the Haven Standard, that price is fixed before anyone picks up a shovel. Change orders only happen if you change the scope, and we don’t start the new work until you’ve signed it.

DIY or Call Us?

There’s a safe middle ground here. A homeowner can check whether a post is loose by gripping it at chest height and applying steady pressure; if it rocks in the concrete, the footing has failed and the post needs re-poured. You can also verify gate sag with a 4-foot level on the top rail. What you shouldn’t do is attempt to reset a post yourself. The Mr-Glass vinyl posts are hollow and lightweight, which makes them easy to handle but easy to install out of plumb; a post even 2 degrees off vertical will stress every panel connected to it. And the concrete footing needs to hit 3,000 PSI before you hang panels, which takes 48 hours minimum in Mountain View’s typical 60-70 degree spring weather. We’ve re-done three DIY post sets in the last year alone, all because the footing was poured dry-pack and cracked within a month. Call (669) 215-4852 and we’ll give you a written price for the fix.

FAQs