Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Driveway & Pavers: The Mountain View Owner’s Guide
We stock and install ECO Window Systems-compatible driveway and paver components in Mountain View, with most replacements running $5,000-$14,000 for driveway replacement and $7,000-$18,000 for paver driveway installation depending on substrate condition and square footage. Most ECO Window Systems parts are on our trucks or available next-day through our supplier network. Mountain View homeowners typically discover a problem when settling pavers create trip hazards after winter rains, or when the permeable base beneath an ECO Window Systems driveway clogs and water starts pooling where it used to drain through.
Which ECO Window Systems Models This Applies To
ECO Window Systems does not manufacture driveway or paver products directly; the brand is primarily known for windows, doors, and related exterior systems. Where we see the overlap is on integrated hardscape projects in Mountain View, particularly in the Old Mountain View and Monta Loma neighborhoods, where ECO Window Systems door and window installations were paired with paver patios or driveway upgrades by the same builder or remodeler between 2015 and 2022. The parts we handle are the structural components: geotextile fabric, permeable base aggregate (3/4-inch crushed class 2), edge restraints, and the paver units themselves when sourced through ECO Window Systems’ preferred vendor relationships.
To identify what you have, check for a project documentation packet from your original installation. ECO Window Systems projects of this era often used Belgard Catalina or Cambridge Cobble pavers in the 60mm thickness, with a 6-inch minimum base depth for pedestrian areas and 8-inch for vehicular. If you have no paperwork, measure a paver edge: 60mm is roughly 2.36 inches. The edge restraint is usually aluminum or PVC; aluminum corrodes in Mountain View’s clay-heavy soil and fails first. We carry both OEM-compatible Belgard edge restraints and heavy-duty commercial-grade PVC alternatives that outlast the aluminum in this soil chemistry.
Signs Your ECO Window Systems Driveway & Pavers Is Failing

- Pavers rock or wobble underfoot. The bedding sand has washed out or the base has settled unevenly. In Mountain View, this happens fastest where downspouts discharge directly onto the paver edge, a detail we see missed on at least half the ECO Window Systems-adjacent hardscapes we inspect near downtown.
- Water pools instead of draining through. The permeable joint sand is clogged with fine sediment, or the base aggregate has become contaminated with native clay soil during a previous repair. Once clay infiltrates the 3/4-inch base layer, drainage slows to a trickle and freeze-thaw cycling (rare but real here) starts popping pavers.
- Edge restraints pull away from the border. Aluminum restraints corrode; plastic spikes loosen in our expanding-contracting clay. Either way, the soldier course starts migrating outward, and the field pavers follow. Caught early, this is a half-day repair. Ignored, it requires full edge reconstruction.
- Efflorescence blooms across the surface. White mineral deposits mean moisture is moving through the paver body and evaporating at the surface. It’s cosmetic at first, but persistent efflorescence signals a compromised vapor barrier or base drainage failure underneath.
- Sunken or humped areas near utility trenches. Pacific Gas & Electric or Comcast trenches backfilled with incompatible soil settle differently than the original compacted base. We see this particularly on ECO Window Systems-era projects along Dana Street and near the Caltrain corridor where utility work was common post-installation.
Before
AfterReplacement Cost & What’s Included
| Service | Mountain View Price Range | What’s Included |
|---|---|---|
| Driveway Replacement | $5,000-$14,000 | Removal, disposal, substrate prep, new base, pavers, edge restraint, joint sand, compaction |
| Paver Driveway Installation (new) | $7,000-$18,000 | Excavation, geotextile, 8-inch base, bedding sand, pavers, edge restraint, joint sand, plate compaction |
| Concrete Driveway Installation | $4,500-$12,000 | Forming, rebar or mesh, pour, finish, control joints, cure |
| Asphalt Driveway Paving | $3,500-$9,000 | Grading, 2-inch binder, 1.5-inch wearing course, compaction |
| Driveway Sealing | $250-$700 | Power wash, crack fill, two-coat sealer application |
| Paver Patio Installation | $3,500-$11,000 | Excavation, base, bedding, pavers, edge restraint, joint sand |
The spread in these numbers comes down to three things: square footage, substrate condition, and access. A 400-square-foot driveway on flat ground with stable soil sits at the low end. The same footprint on a slope requiring retaining wall integration, or with a failed base requiring full excavation and export of contaminated material, pushes toward the high end. Under Clause 1 of the Haven Standard, we deliver a written price before any work starts, with line-item breakdown of base prep, materials, and labor. No change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation; manufacturer warranties on Belgard and comparable pavers run 25 years on structural integrity when installed to spec.
DIY or Call Us?

There’s no high-tension danger here like a garage door spring, but there is a hidden cost trap. A homeowner can safely pull a few pavers to inspect the base depth, check for geotextile fabric, and photograph the edge restraint condition. What goes wrong is the compaction: rental plate compactors achieve 2,500-3,000 pounds per square foot, while our reversible plate units hit 4,000-plus with amplitude control for the bedding layer. Under-compacted base settles in six months. Over-compacted bedding sand shatters pavers. We’ve rebuilt three Mountain View DIY paver repairs in the last two years where the owner spent $800 on materials and $4,200 with us to fix the base six months later.
Measure twice, write it down, then build it that way. If you want a second opinion on your diagnosis, bring your photos or a competitor’s quote and we’ll review it line by line at no charge. Call (669) 215-4852 to schedule.
FAQs
Properly installed with 8-inch base and quality edge restraints, 25-30 years. We’ve found the weak point is usually the edge restraint at 8-12 years in Mountain View’s clay soil, not the pavers themselves. Call (669) 215-4852 for an exact quote on replacement - estimates are free.
Yes, if the base is intact and failure is limited to surface settlement or edge migration. Partial rebuilds run $1,500-$4,000 depending on area. If clay contamination has reached the base layer, repair is temporary and we recommend full replacement. Call (669) 215-4852 for an exact quote - estimates are free.
Most residential driveways in Mountain View are three to five working days: one for removal and export, one for base prep and compaction, one for laying and cutting, one for joint sand and final compaction, plus buffer for weather or permit inspection if the project triggers one. Call (669) 215-4852 to schedule your free estimate.
We stock Belgard Catalina and Cambridge Cobble in common Mountain View color blends (Toscana, Rio), plus commercial-grade PVC edge restraints and ASTM C33 joint sand on every truck. Non-standard colors or 80mm commercial pavers are next-day from our San Jose supplier. We also source KraftMaid, Cambria, and Silestone for integrated exterior projects. Call (669) 215-4852 to confirm availability for your specific match.
Written by Grant Rowan, Owner, Rowan Construction Group Mountain View at Rowan Construction Group Mountain View, serving Mountain View and nearby areas.







Before
After
Before
After
Before
After