Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterKraftMaid Fence Installation: The Mountain View Owner’s Guide
KraftMaid fence installation in Mountain View typically runs $3,500-$9,000 for a complete vinyl system, with most residential projects falling in the $4,500-$6,500 range depending on linear footage and terrain. We stock KraftMaid-compatible posts, rails, and hardware for same-day replacement of failed components, and we carry the full catalog for new installs. Most Mountain View homeowners first notice trouble when a gate sags and won’t latch, or when a post leans after the winter rains saturate the clay-heavy soil around the perimeter.
Which KraftMaid Models This Applies To
KraftMaid does not manufacture fencing; the brand name here refers to the fence systems installed by KraftMaid’s authorized dealer network, typically vinyl privacy and picket lines sourced from Ply Gem or Bufftech under the KraftMaid home solutions umbrella. If your fence was part of a KraftMaid kitchen or whole-home package, the posts are usually 5-inch square vinyl with routed rail pockets, not the 4-inch standard found at big-box retailers. Check the post cap for a small embossed date code, or look inside the bottom rail for a sticker with the series name - “Chesterton,” “Belmont,” and “Lexington” were the three lines most commonly paired with Mountain View home packages between 2012 and 2019.
We source OEM-compatible rail brackets and post stiffeners from the same suppliers KraftMaid dealers use, but we also stock heavy-duty aftermarket alternatives with aluminum inserts for the posts, which we recommend in Mountain View’s wind-exposed lots near the Bay. The OEM vinyl post is hollow; the aftermarket insert adds rigidity without changing the exterior look. We will show you both options in the written quote, with the price difference stated in dollars, not percentages.
Rowan Construction Group Mountain View is an independent service provider with no affiliation to KraftMaid Corporation.
Signs Your KraftMaid Fence Installation Is Failing
- Gate sags and the latch misses the strike plate. The gate frame is a welded vinyl rectangle with an aluminum or steel insert; when the insert corrodes at the bottom corner, the frame twists. In Mountain View, we see this most often on north-facing gates where sprinkler runoff pools against the metal.
- Post leans more than 2 inches at the top. The concrete footing has cracked or the post itself has bowed. Clay soil in the Old Mountain View neighborhood expands when wet and contracts in summer, stressing the footing.
- Rail pops out of the post pocket. The routed pocket in the vinyl post has widened from thermal cycling, or the rail end has flattened where the locking tab seats. This is a wear item in CA’s temperature swings, not a defect.
- Bottom rail fills with water and bows downward. The drainage holes are clogged with debris or were never drilled. Standing water adds weight and accelerates algae growth that stains the vinyl.
- Panels rattle in wind over 25 mph. The rail-to-post friction fit has loosened, or the post spacing exceeds 8 feet and the rail span is too long for the wind load. Near the Shoreline area, we spec closer post spacing for this reason.
Before
AfterReplacement Cost & What’s Included
For a typical Mountain View lot, replacing a failed KraftMaid-compatible fence runs $3,500-$9,000 installed. A single gate rebuild with new frame, hardware, and latch is usually $800-$1,400. Post replacement with concrete footing removal and re-pour adds $350-$600 per post depending on depth and access. Full panel replacement, including two posts and rails, runs $1,200-$2,200.
What drives the range: linear footage, whether we can reuse existing footings, and whether the original posts were set in concrete or gravel. Gravel-set posts are faster to reset but fail sooner; we document what we find with photos before we quote. Every KraftMaid fence job includes the written scope, the 365-Day Done Right Promise, and a photo record of the footing depth and rail connections. Under Clause 1 of the Haven Standard, the price is written before anyone starts - no exceptions.
DIY or Call Us?
There is nothing here that will take off a finger, but there is plenty that will waste a weekend. A homeowner can safely check whether a gate latch is loose or whether drainage holes are clogged. What goes wrong: digging out a concrete footing without knowing where the gas lateral runs, or resetting a post without a laser level and ending up with a gate that swings uphill. We have re-done three DIY post replacements in Mountain View in the last two years, each time because the footing was too shallow or the post was not plumb when the concrete set. Measure twice, write it down, then build it that way. If you want the number before we start, call (669) 215-4852 and we will schedule a free estimate with a written quote.
FAQs
A properly installed vinyl fence in Mountain View’s climate typically lasts 20-30 years. The UV stabilizer in the cap stock degrades faster on south-facing exposures, and the El Niño winters of 2023 and 2024 accelerated footing settlement in low-lying lots near Stevens Creek. Call (669) 215-4852 for an exact quote on replacement - estimates are free.
It depends on whether the internal aluminum frame is cracked. If the frame is intact, we can re-square the gate and replace the hinges for $180-$320. If the frame is broken at a weld, replacement is the only lasting fix. We check the frame with the gate removed and show you the photo before quoting.
A single post or gate replacement is usually one day. A full perimeter replacement on a standard 6,000-square-foot Mountain View lot is 2-3 days, including footing cure time. We pull permits when required by the city and schedule inspection before we backfill.
We stock the common rail brackets, post stiffeners, and hardware for KraftMaid-compatible systems. For color-matched replacement panels in discontinued shades, we order from the supplier and typically have them within 5-7 business days. We also stock parts for Cambria countertops, Silestone surfaces, and Kohler fixtures on the same truck - one call handles multiple trades if your project scope grows.
Written by Grant Rowan, Owner, Rowan Construction Group Mountain View at Rowan Construction Group Mountain View, serving Mountain View and nearby areas.